Description

Product Information: [Product Size]: about 14 * 20 * 7cm Product Material]: ABS Product weight]: Gross weight (about) 840g Power cord length]: about 300cm/10ft Air tube length about 50cm/1.64ft [Output power]: 120 (W) [Rated Voltage]: DC12 (V) [Lighting]: LED Product Information: [Product Size]: about 2.1" * 2.9" * 7.28" Product Material]: ABS/PP Product weight]: Gross weight (about) 590g/1.3lbs Power cord length]: about 320cm/10.49ft Air tube length about 18cm/7.08 inch [Output power]: 120 (W) [Rated Voltage]: DC12 (V) [Lighting]: LED Description: The tire air pressure is normal or not directly related to the safety of driving and fuel economy. In order to help you keep your vehicle tires in the best condition at all times, we have specially launched this digital display car inflator pump. Feature: 1, The machine applies to 12V car tires, also applies to motorcycles, bicycles, balls, rubber boats, beach pontoon beds, inflatable toys, etc.. 2, Comes with a variety of inflatable nozzle head, suitable for different models of tires, bicycles, sports equipment and other types of inflatable needs, but also in the highway, the field or on the way to work in the case of a sudden leakage of tires to play the role of emergency rescue. 4, the use of advanced digital display technology, to maintain the correct tire pressure, can ensure driving safety, and save fuel consumption, with the car with the wonderful use. 5, with a full set of inflatable nozzles, can be used to inflate tires, dinghies, air mattresses, inflatable toys, ball inflatable and a variety of other uses. Instructions for use: 1, the rubber hose head of the air nozzle directly inserted in the tire valve, when you hear the sound of air leaking out of the tire, said the air has been circulating, continue to tighten the air nozzle, at this time the air is no longer leaking out. 2,Insert it into the DC12V cigarette lighter. 3、When inflating, pre-selected corresponding inflation mode, (general tire pressure of car tires is 223kpa=35PSI), when inflating reaches the preset value, the equipment will automatically stop inflating, take out the plug and nozzle, that is to complete the work. Note: 1, please use the machine equipped with a professional ball needle, plastic nozzle and air nozzle connected to the ball, and other need to inflate the equipment to inflate. 2, can not be used in large and overweight vehicle tire inflation, such as trucks, large trucks, box-type container trucks; 3, the use of the car engine to start to enhance the power, does not consume the car battery power; 4, this machine is limited to use direct current (DC12V) power supply, can not be used for household high-voltage AC (AC220V) power supply; 5, inflatable, please stop the machine for 15 minutes after 5 minutes of continuous work for cooling, to prevent damage to the air pump and accessories, and can extend the life of the motor. 6, general tires in the inflatable, about 3-5 minutes can reach 30PSI normal tire pressure, large tires will be a little longer; such as the beginning of the inflatable air did not enter the tire, this time you need to immediately unplug the nozzle connector, re-operation, otherwise the motor is easy to damage. 7, use people do not leave the body, pay attention to tire pressure at any time, not too saturated; 8, after the use of this machine, the nozzle wrench must be wrenched straight, so as not to fatigue the rubber elasticity inside; 9, the air pump plug fuse, such as the air pump does not start, please open the plug to check and replace (fuse for 10A); 10, the machine should be avoided wet, heavy fall and sand intrusion, avoid children play to avoid damage; 11、Each kind of tire requires different pressure, please refer to the label on the side of the car tire, or ask the car manufacturer to set the best tire pressure.